Minor part correction in CLASH and SLAMMER iii reels

Corrected on CLA3000 thru CLA8000 schematics
http://store.scottsbt.com/PennParts/Spinning.aspx#Clash

and on SLA3500 thru SLA10500 schematics
http://store.scottsbt.com/PennParts/Spinning.aspx#SlammerIII

CHANGE:
36B    1417809    36B-CLA5000    Bail arm Screw Washer (FORMERLY 36B-CLA6000)

SLAMMER III Parts info and schematics added to system

 Parts section:
 http://store.scottsbt.com/PennParts/Spinning.aspx#SlammerIII

There are some troubleshooting notes in these first Rev 0 early run reels. We found them when dissecting the reels for parts and photos.

We will be adding all the notes to the schematics and possibly making updates in the near future, when/if more info about incorrect part numbers or typos is obtained.

All of them have issues noted. The SLA9500 and SLA10500 especially have a bunch of notes about problems found when breaking down the first reels to get at the parts, some of which we will have to troubleshoot when the parts get here from our tech's bench.

EU spinning reel Atlantis added to the Spinning parts section

As with all international reel release, the EU Atlantis spinning reels are in our online catalog only as specs/information pages. We don't have parts specifically for those reels, although the Atlantis specifically might have compatibility with the Conquer reels (unconfirmed)

http://store.scottsbt.com/PennParts/Spinning.aspx#UKReels

Schematic Update 114H w/post framework

Revised the post framework version of the regular and left hand schematics for the 114H, to make the change to #27 plates and #40 bearings more clear.

http://www.scottsbt.com/catalog/store/images/pennparts/schematics/114h_post.pdf

http://www.scottsbt.com/catalog/store/images/pennparts/schematics/114h_lh_post.pdf

Fierce Spinning Schematic revisions

Just some small corrections and revisions.

Corrected the typo where the #56 Felt washers had accidentally been listed as HT100.

and then added the optional substitution part info to all of them about corresponding HT100's

http://store.scottsbt.com/PennParts/Spinning.aspx#FierceFamily

Rival Levelwind Parts and Schematics added to the system

Rival Levelwind Parts and Schematics added to the system on 10/9/16

The Rival reels come out in November 2016

http://store.scottsbt.com/PennParts/Conventional.aspx#RivalFamily


********** Update - All the Rival 30 sized levelwinds had some errors that were updated on their schematics by us 10/15/16

Schematics updated Original Internationals 20, 30, 50, 50W

Proper notes added to schematics about the design change in the clicker button and tongue.
We had the notes online in the parts descriptions in the catalog, but the schematics had never had the notes added.

http://www.scottsbt.com/catalog/store/images/pennparts/schematics/20.pdf

http://www.scottsbt.com/catalog/store/images/pennparts/schematics/30.pdf

http://www.scottsbt.com/catalog/store/images/pennparts/schematics/50.pdf

http://www.scottsbt.com/catalog/store/images/pennparts/schematics/50w.pdf

Schematics update for CLASH reels

Updated our copies of the schematics to reflect the changes to the parts list which include being able to replace the knob parts on the handles.

http://store.scottsbt.com/PennParts/Spinning.aspx#Clash

Parts that are not yet in stock will be added to our next orders from Penn.

Schematics 50T 50TW updated

Schematics 50T 50TW updated
Small changes noted 161C bushing assembly, 156A seal

http://www.scottsbt.com/catalog/store/images/pennparts/schematics/50t.pdf

http://www.scottsbt.com/catalog/store/images/pennparts/schematics/50tw.pdf

8-5000SG main gear is back in stock.

8-5000SG main gear is back in stock.
We've had a lot of requests for it so posting it here.
http://store.scottsbt.com/8-5000SG-Gear-Main-Gear-P22582.aspx

Schematic Updates and Revisions July 30-August 13, 2016

430SSg minor corrections to drawing and parts list.
http://store.scottsbt.com/PennParts/Penn430SSg.aspx
Added 95B and 45A locking parts for rotor nut.

Revising schematics for the Fathom SD reel
http://store.scottsbt.com/PennParts/Conventional.aspx#FathomStarDrag
Changes affect parts 4, 12 and 12A
Will be SBT Ver. 073016
Parts changes all noted, measurements taken of the old and new #12 and added design change notes online.

Waiting for the newer 12A parts to come in from Penn.

Updating Senator 115 and 116 design changes notes.

Adding additional information regarding the various design changes to the 115L, 116L reels.

115: Early run reel information added regarding older style hubbed spools and yet another older style bearing #40-114
Links:
http://store.scottsbt.com/115LDesignChangeLeft.aspx
http://store.scottsbt.com/115LDesignChangeRight.aspx


116: Added previously un-noted change to the 13-116 pinion gap width.
Link:
http://store.scottsbt.com/115LDesignChangeRight.aspx

I will be adding notes to the schematics for all reels involved, as well, probably have that done by next week.
~Mo