Fathom Lever Drag LD 2 Speed updates

Fathom Lever Drag LD 2 Speed updates

Rev0 schematics edited for changes in Rev1 or Rev3 depending on the model.

FTH15XNLD2 and FTH15XNLD2LH schematic and parts have been added to the system.

Notes about error corrections and/or design changes added to schematics where applicable.

https://www.mysticparts.com/PennParts/Conventional.aspx#FathomLeverDrag2Speed

Penn Fathom Lever Drag 2-Speed Reels
FTH15LD2 Fathom Lever Drag 2-Speed
FTH15XNLD2 Fathom Lever Drag 2-Speed
FTH15XNLD2LH Fathom Lever Drag 2-Speed
FTH25NLD2 Fathom Lever Drag 2-Speed
FTH25NLD2-LH Fathom Left Hand Lever Drag 2-Speed (Left Hand)
FTH30LD2 Fathom Lever Drag 2-Speed
FTH30LD2-LH Fathom Left Hand Lever Drag 2-Speed (Left Hand)
FTH40NLD2 Fathom Lever Drag 2-Speed
FTH60LD2 Fathom Lever Drag 2-Speed

I will soon be updating the reel specs page for these reels as well. https://www.mysticparts.com/PennParts/ReelSpecs/PennFathomLever2-Speed.aspx#specs

First Year Manf.: 2014
REEL INFO: The PENN Fathom lever drag 2-speed series of reels are compact but loaded with big features. Featuring a Full Metal Body, stainless steel main and pinion gear, Dura-Drag washers, and a double dog ratchet anti- reverse you will find there is no stopping these reels. (2014 Advertising)

HISTORY:
Name/Series: Fathom, Fathom Lever Drag 2-Speed

Construction:

Full metal body and sideplates
Forged and machined aluminum spool
Stainless steel main and pinion gear
Dura-Drag washers virtually eliminate hesitation, even under extreme drag settings
Line Capacity Rings
Quick-Shift 2-speed system
Double-dog ratchet anti-reverse
5 shielded stainless steel ball bearings

I will also be adding the image files for the reels.

Slammer IV Spinning Reels, Specs, Parts and Schematics online

Penn's Slammer IV series is completely set up in our site as of 9/24/22

I've finished re-revising our MRP versions of the schematics with errors/changes by Penn and our added notes for each reel. Corrected some of my own errors from the first upload as well.

Slammer IV specs page with links to parts sections, schematics and owners manual (Penn's generic spinning reel manual):

https://www.mysticparts.com/PennParts/ReelSpecs/PennSlammerIV.aspx#specs

Slammer IV Reel section:

https://www.mysticparts.com/Fishing/Reels/Penn/SlammerIV_Spinning.aspx

NOTE:

Slammer IV DX is being done as a separate grouping so that's next for our MRP version of schematics etc.

Parts for the DX are already online

 https://www.mysticparts.com/PennParts/Spinning.aspx#SlammerIVDX

~Mo, Parts & Tech Support

SQUALL ii Star Drags fully online

SQUALL ii Star Drags fully online

Squall II Star Drag series parts sections
With the MRP version of schematics uploaded this week 8/10/22
https://www.mysticparts.com/PennParts/Conventional.aspx#SqualliiStarDrag

Reel Specs page
https://www.mysticparts.com/PennParts/ReelSpecs/PennSqualliiStarDrag.aspx

Reels online to order
(by special order if Penn has them, not currently in stock here)
https://www.mysticparts.com/Fishing/Reels/Penn/SqualliiStarDrag.aspx

~Mo, Parts & Tech Support

SCHEMATIC REVISIONS: Penn General Purpose Levelwind 9, 9LH, 109, 109LH, 209, 209LH, 209LC and 309

SCHEMATIC REVISIONS: Penn General Purpose Levelwind 9, 9LH, 109, 109LH, 209, 209LH, 209LC and 309  1

 Currently revising from Penn's most recent schematic revisions

Adding all the design change notes etc.to our MRP schematic pdf files

https://www.mysticparts.com/PennParts/Conventional.aspx#GPLevelwind

UPDATED   9, 9M, 9F, 9S, 9MF, 9MS Peerless Monofil

UPDATED   9-LH, 9M-LH Peerless Monofil (Left Hand)

UPDATED   109, 109M, 109F, 109S, 109MF, 109MS Peer Monofil

UPDATED   109-LH, 109M-LH Peer Monofil (Left Hand)

UPDATED   209, 209M Peer Monofil Sr.

UPDATED    209-LH, 209M-LH Peer Monofil Sr. (Left Hand)

UPDATED   209LC Line Counter Peer Monofil Sr.

UPDATED   309M Super Peer

MAIN AND PINION GEAR DESIGN CHANGES!

One of the big changes over time for these was in the 209LC gearing (RATIO 3.2:1) being backwards compatible. As Conversion Kit for: 25, 26, 27, 155L, 160L, 180, 209M (Original gearing was (RATIO 3:01) 

LH 155-LH and 209M-LH reels, teeth counts updated (with the parts links like in the conversions) on all gear notes in descriptions https://www.mysticparts.com/PennParts/Parts/5-155LH.aspx (RATIO 3:01) https://www.mysticparts.com/PennParts/Parts/13-155LH.aspx (RATIO 3:01) https://www.mysticparts.com/PennParts/Parts/5-209LC-LH.aspx (RATIO 3.2:1) https://www.mysticparts.com/PennParts/Parts/13-209LC-LH.aspx (RATIO 3.2:1) 

LH 155-LH and 209M-LH reels teeth counts updated in the conversion info

https://www.mysticparts.com/155LConvertingLH.aspx

https://www.mysticparts.com/PennParts/Parts/209M-Convert-Left-Hand.aspx 

Regular RH reels, gear notes added with linked parts to regular gearing https://www.mysticparts.com/PennParts/Parts/5-155.aspx (RATIO 3:01) https://www.mysticparts.com/PennParts/Parts/13-155.aspx (RATIO 3:01) https://www.mysticparts.com/PennParts/Parts/5-209LC.aspx (RATIO 3.2:1) https://www.mysticparts.com/PennParts/Parts/13-209LC.aspx (RATIO 3.2:1)

and kit for the 209LC gearing

https://www.mysticparts.com/PennParts/Parts/5C-209.aspx

So I fleshed out the notes on our schematics and online so it's basically everywhere it would need to be to be seen.

Schematics: Slammer III, SLAiii Spinning Reels - Revisions Done to .pdfs

 https://www.mysticparts.com/PennParts/Spinning.aspx#SlammerIII

10/8/22 corrections to the SLA550, SLA6500, SLA6500HS MRP versions of schematics for part key #22a, see schematics. Also reformatted the layouts for clarity on all the pdf files. ~Mo

11/2019  Updated from Penn's most recent schematic revisions

MRP versions will reflect design changes, corrections and known problems.

There's a big set of changes in these because they changed the entire bail system after a couple of early runs. ~Mo

Schematic Updates 710z and 711z

Schematic Updates 710z and 711z
Changed 47A bushing to 48A per Penn's 2012 change
Added the new 47A pin part number info from Penn's inventory list

700 Series parts section:
https://www.mysticparts.com/PennParts/Spinning.aspx#SS1stGen

Minor part correction in CLASH and SLAMMER iii reels

Corrected on CLA3000 thru CLA8000 schematics
http://store.scottsbt.com/PennParts/Spinning.aspx#Clash

and on SLA3500 thru SLA10500 schematics
http://store.scottsbt.com/PennParts/Spinning.aspx#SlammerIII

CHANGE:
36B    1417809    36B-CLA5000    Bail arm Screw Washer (FORMERLY 36B-CLA6000)

SLAMMER III Parts info and schematics added to system

 Parts section:
 http://store.scottsbt.com/PennParts/Spinning.aspx#SlammerIII

There are some troubleshooting notes in these first Rev 0 early run reels. We found them when dissecting the reels for parts and photos.

We will be adding all the notes to the schematics and possibly making updates in the near future, when/if more info about incorrect part numbers or typos is obtained.

All of them have issues noted. The SLA9500 and SLA10500 especially have a bunch of notes about problems found when breaking down the first reels to get at the parts, some of which we will have to troubleshoot when the parts get here from our tech's bench.

Schematic Update 114H w/post framework

Revised the post framework version of the regular and left hand schematics for the 114H, to make the change to #27 plates and #40 bearings more clear.

http://www.scottsbt.com/catalog/store/images/pennparts/schematics/114h_post.pdf

http://www.scottsbt.com/catalog/store/images/pennparts/schematics/114h_lh_post.pdf

Fierce Spinning Schematic revisions

Just some small corrections and revisions.

Corrected the typo where the #56 Felt washers had accidentally been listed as HT100.

and then added the optional substitution part info to all of them about corresponding HT100's

http://store.scottsbt.com/PennParts/Spinning.aspx#FierceFamily

Schematics update for CLASH reels

Updated our copies of the schematics to reflect the changes to the parts list which include being able to replace the knob parts on the handles.

http://store.scottsbt.com/PennParts/Spinning.aspx#Clash

Parts that are not yet in stock will be added to our next orders from Penn.

Schematics 50T 50TW updated

Schematics 50T 50TW updated
Small changes noted 161C bushing assembly, 156A seal

http://www.scottsbt.com/catalog/store/images/pennparts/schematics/50t.pdf

http://www.scottsbt.com/catalog/store/images/pennparts/schematics/50tw.pdf

Schematics new and updated

UPDATES to Schematics today

Penn Fathom Lever Drag 2-Speed
Added schematics
http://store.scottsbt.com/PennParts/Conventional.aspx#FathomLeverDrag2Speed

515MAG2, 525MAG2 (Series 2)
Revised schematics
http://store.scottsbt.com/PennParts/Conventional.aspx#MAG

UPDATED 114HL Schematic

UPDATES to Schematics today

114HLW
Added information to drawing and parts list regarding the two different frames and the differences in the stands and stand screws.

Updated Schematics Today

UPDATES to Schematics today
60, 60-LH, 65, 66-67-68 (Measure!), 125, 505HS, 506HS, 970, 980, 990

INSTALLATION:
To replace the click tongue on models where it is peened into place, use a dremel drill with a fine tip to remove the old click tongue and click button. Then peen the new 36-209 into place.

NOTE:
On older 66, 67 and 68 reels a 36-60CH may be required. It measures .248 (roughly 1/4 inch) from just under the cap to the edge of the dropdown.
The 36-209 measures .283 (roughly 1/16 inch longer) Penn may have changed the 27-66 plate at some point, although there are no notes to that effect.

OPTIONAL:
Any reel that uses the 36-209 can use:
36N-209 w/ 69B-600 removable c clip
This newer style is held by the clip instead of being peened in place.

Notes have be added in the appropriate parts online, as well.

Updated Defiance Schematics DFN20LW,DFN25LW, DFN30, DFN40LW

UPDATES to Schematics today
DFN20LW,DFN25LW, DFN30, DFN40LW

Regarding:
8A-DFN20LW Washer, Tension, Rectangular w/bent ends
http://store.scottsbt.com/8A-DFN20LW-Washer-Tension-Rectangular-wbent-ends-P27155.aspx

We assigned this part number to the part found in the early run models of these reels.

As of June 2015, Penn has informed us that it is not used on later runs of the reels and is not required. They are not assigning it part number or making it available to order as a result.

Schematic Update for 130, 130H international reels

Schematic Update for 130, 130H international reels

Added a part that Penn had not put on the schematic drawing, as they never gave it an official part number. The screws that hold the cam housing assembly into the handle side plate can be replaced by 50-704.
Revised schematics are now online in our site.

UPDATES to Schematics today

UPDATES to Schematics today

920 - corrected error where a c-clip part 69b-50 was listed on the schematic list but was not actually used in the reel.
 
30T - corrected typo where 33-114 clamp was listed instead of the 33-990 clamp, which is the correct part number.
 
TRQS5B, TRQS5G, TRQS5BBL - corrected typo on Penn's schematic, part 53S-TS5 should be 53S-TS7. Pure Fishing Part# 1211093 confirmed.
 
US113, UW113N, US113W - working on building and adding schematics to the parts dept. of the catalog.

Schematics Updated

Updates have been made to the 249 and 230GTO schematics.

SQL Leverdrag Schematics updated with revision

Small revision on the schematics where a 3 part bearing was merged into a bearing assembly.
SQL30LD, SQL40LD, SQL40LDLH, SQL50LD, SQL60LD, SQL60LDLH